자바 이야기

#!/bin/bash

# PiTFT Resistive 2.8" (PID 1601) or Capacitive 2.8" (PID 1983) setup script or Resistive 3.5" (PID 2097) or 2.2" No-Touchscreen setup script!

set -e

function cleanup() {
 if [ "${mountpoint}" != "/" ]
 then
  sudo -n umount "${mountpoint}/boot" 2> /dev/null
  sudo -n umount "${mountpoint}" 2> /dev/null
  sudo -n rmdir "${mountpoint}" 2> /dev/null < /dev/null
 fi
}

function wgetfiles() {
# grab wget images
    wget -c http://adafruit-download.s3.amazonaws.com/libraspberrypi-bin-adafruit.deb
    wget -c http://adafruit-download.s3.amazonaws.com/libraspberrypi-dev-adafruit.deb
    wget -c http://adafruit-download.s3.amazonaws.com/libraspberrypi-doc-adafruit.deb
    wget -c http://adafruit-download.s3.amazonaws.com/libraspberrypi0-adafruit.deb
    wget -c http://adafruit-download.s3.amazonaws.com/raspberrypi-bootloader-adafruit-20140917-1.deb
}

function update_etcmodules() {
 chr="$1"
 shift

 if grep -xq "spi-bcm2708" "${chr}/etc/modules" ; then
     echo "Already had spi-bcm2708"
 else
     echo "Adding spi-bcm2708"
     sudo chroot "${chr}" /bin/sh -c 'cat >> /etc/modules' <<EOF
spi-bcm2708
EOF
 fi

 if [ "${pitfttype}" == "28c" ]
     then
     if grep -xq  "i2c-bcm2708" "${chr}/etc/modules" ; then
  echo "Already had i2c-bcm2708"
     else
  echo "Adding i2c-bcm2708"
  sudo chroot "${chr}" /bin/sh -c 'cat >> /etc/modules' <<EOF
i2c-bcm2708
EOF
     fi
 fi 

 if grep -xq  "fbtft_device" "${chr}/etc/modules" ; then
     echo "Already had fbtft_device"
 else
     echo "Adding fbtft_device"
     sudo chroot "${chr}" /bin/sh -c 'cat >> /etc/modules' <<EOF
fbtft_device
EOF
 fi
}

function install_onoffbutton() {
 chr="$1"
 shift

 echo "Adding rpi_power_switch to /etc/modules"
 if grep -xq "rpi_power_switch" "${chr}/etc/modules" ; then
     echo "Already had rpi_power_switch"
 else
     echo "Adding rpi_power_switch"
     sudo chroot "${chr}" /bin/sh -c 'cat >> /etc/modules' <<EOF
rpi_power_switch
EOF
 fi

 echo "Adding rpi_power_switch config to /etc/modprobe.d/adafruit.conf"
 if grep -xq "options rpi_power_switch gpio_pin=23 mode=0" "${chr}/etc/modprobe.d/adafruit.conf" ; then
     echo "Already had rpi_power_switch config"
 else
     echo "Adding rpi_power_switch"
     sudo chroot "${chr}" /bin/sh -c 'cat >> /etc/modprobe.d/adafruit.conf' <<EOF
options rpi_power_switch gpio_pin=23 mode=0
EOF
 fi 

}

function update_x11profile() {
 chr="$1"
 shift

 echo "Moving 99-fbturbo.conf to /home/pi"
 sudo chroot "${chr}" mv /usr/share/X11/xorg.conf.d/99-fbturbo.conf /home/pi

 if grep -xq "export FRAMEBUFFER=/dev/fb1" "${chr}/home/pi/.profile" ; then
     echo "Already had 'export FRAMEBUFFER=/dev/fb1'"
 else
     echo "Adding 'export FRAMEBUFFER=/dev/fb1'"
     sudo chroot "${chr}" /bin/sh -c 'cat >> /home/pi/.profile' <<EOF
export FRAMEBUFFER=/dev/fb1
EOF
 fi
}


function update_adafruitconf() {
 chr="$1"
 shift

 if [ "${pitfttype}" == "22" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/modprobe.d/adafruit.conf' <<EOF
options fbtft_device name=adafruit22a gpios=dc:25 rotate=270 frequency=32000000
EOF
 fi
 
 if [ "${pitfttype}" == "28r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/modprobe.d/adafruit.conf' <<EOF
options fbtft_device name=adafruitrt28 rotate=90 frequency=32000000
EOF
 fi

 if [ "${pitfttype}" == "28c" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/modprobe.d/adafruit.conf' <<EOF
options fbtft_device name=adafruitct28 rotate=90 frequency=32000000
EOF
 fi

 if [ "${pitfttype}" == "35r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/modprobe.d/adafruit.conf' <<EOF
options fbtft_device name=adafruitrt35 rotate=90 frequency=32000000
EOF
 fi
}

# currently for '90' rotation only
function update_xorg() {
 chr="$1"
 shift
 sudo chroot "${chr}" mkdir -p /etc/X11/xorg.conf.d

 if [ "${pitfttype}" == "28r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/X11/xorg.conf.d/99-calibration.conf' <<EOF
Section "InputClass"
        Identifier      "calibration"
        MatchProduct    "stmpe-ts"
        Option  "Calibration"   "3800 200 200 3800"
        Option  "SwapAxes"      "1"
EndSection
EOF
 fi

 if [ "${pitfttype}" == "35r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/X11/xorg.conf.d/99-calibration.conf' <<EOF
Section "InputClass"
        Identifier      "calibration"
        MatchProduct    "stmpe-ts"
        Option  "Calibration"   "3800 120 200 3900"
        Option  "SwapAxes"      "1"
EndSection
EOF
 fi

 if [ "${pitfttype}" == "28c" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/X11/xorg.conf.d/99-calibration.conf' <<EOF
Section "InputClass"
         Identifier "captouch"
         MatchProduct "ft6x06_ts"
         Option "SwapAxes" "1"
         Option "InvertY" "1"
         Option "Calibration" "0 320 0 240"
EndSection
EOF
 fi

}

function update_udev() {
 chr="$1"
 shift
 if [ "${pitfttype}" == "28r" ] || [ "${pitfttype}" == "35r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/udev/rules.d/95-stmpe.rules' <<EOF
SUBSYSTEM=="input", ATTRS{name}=="stmpe-ts", ENV{DEVNAME}=="*event*", SYMLINK+="input/touchscreen"
EOF
 fi

 if [ "${pitfttype}" == "28c" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/udev/rules.d/95-ft6206.rules' <<EOF
SUBSYSTEM=="input", ATTRS{name}=="ft6x06_ts", ENV{DEVNAME}=="*event*", SYMLINK+="input/touchscreen" 
EOF
 fi
}

# currently for '90' rotation only
function update_pointercal() {
 chr="$1"
 shift
 if [ "${pitfttype}" == "28r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/pointercal' <<EOF
-30 -5902 22077792 4360 -105 -1038814 65536
EOF
 fi

 if [ "${pitfttype}" == "35r" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/pointercal' <<EOF
8 -8432 32432138 5699 -112 -965922 65536
EOF
 fi

 if [ "${pitfttype}" == "28c" ]
     then
     sudo chroot "${chr}" /bin/sh -c 'cat > /etc/pointercal' <<EOF
320 65536 0 -65536 0 15728640 65536
EOF
 fi
}


function success() {
 exit 0
}

function is_zip() {
 unzip -qq -l "$*" > /dev/null 2> /dev/null
}


function is_image() {
 partitions=$(($(echo p | fdisk "${imagename}" 2> /dev/null | grep "${imagename}" | wc -l) - 1))

 # We need at least two partitions
 if [ $partitions -lt 2 ]
 then
  return 1
 fi
 return 0
}

function print_version() {
 echo "Adafruit PiTFT v1.1"
 exit 1
}

function print_help() {
 echo "Usage: $0 -r [-i input-file] [-o output.img] -t [pitfttype]"
 echo "    -h            Print this help"
 echo "    -v  Print version information"
 echo "    -r            Turn the root filesystem into PiTFT compatible"
 echo "    -t [type]     Specify the type of PiTFT: '28r' (PID 1601) or '28c' (PID 1983) or '35r' or '22'"
 echo "Or, you can work on an image file:"
 echo "    -i [file]     Source Raspbian input file"
 echo "    -o [output]   Output name of image file"
 echo ""
 echo "You must specify either -r (to update this system) or -i & -o (to"
 echo "patch a fresh Raspbian image.)"
 exit 1
}

function mount_image() {
 imagename="$1"
 mountpoint="$2"
 line1=$(echo p | fdisk "${imagename}" 2> /dev/null | grep "${imagename}1")
 if [ $? -ne 0 ]
 then
  bail "Unable to read partition table from image"
 fi

 line2=$(echo p | fdisk "${imagename}" 2> /dev/null | grep "${imagename}2")
 if [ $? -ne 0 ]
 then
  bail "Unable to read partition table from image"
 fi

 vfat_offset=$(($(echo ${line1} | awk '{print $2}') * 512))
 ext_offset=$(($(echo ${line2} | awk '{print $2}') * 512))

 sudo mkdir -p "${mountpoint}" || bail "Unable to make mountpoint"
 sudo mount -oloop,offset=${ext_offset} "${imagename}" "${mountpoint}" \
  || bail "Unable to mount root filesystem"
 sudo mount -oloop,offset=${vfat_offset} "${imagename}" "${mountpoint}/boot" \
  || bail "Unable to mount root filesystem"
}

function unmount_image() {
 mountpoint="$1"
 sudo -n umount "${mountpoint}/boot" 2> /dev/null
 sudo -n umount "${mountpoint}" 2> /dev/null
 sudo -n rmdir "${mountpoint}" 2> /dev/null < /dev/null
}

group=ADAFRUIT
function info() {
 system="$1"
 group="${system}"
 shift
 FG="1;32m"
 BG="40m"
 echo -e "[\033[${FG}\033[${BG}${system}\033[0m] $*"
}

function bail() {
 FG="1;31m"
 BG="40m"
 echo -en "[\033[${FG}\033[${BG}${group}\033[0m] "
 if [ -z "$1" ]
 then
  echo "Exiting due to error"
 else
  echo "Exiting due to error: $*"
 fi
 exit 1
}

function apt_update() {
 chr="$1"
 shift
 sudo chroot "${chr}" apt-get -y update
}

function apt_install() {
 chr="$1"
 shift
 sudo chroot "${chr}" apt-get -y install $*
}


function dpkg_install_kernel() {
    chr="$1"
    shift

    cp libraspberrypi-bin-adafruit.deb libraspberrypi-dev-adafruit.deb libraspberrypi-doc-adafruit.deb libraspberrypi0-adafruit.deb raspberrypi-bootloader-adafruit-20140917-1.deb "${chr}"/tmp
    #ls -l "${chr}"/tmp
    sudo chroot "${chr}" dpkg -i -B /tmp/libraspberrypi-bin-adafruit.deb /tmp/libraspberrypi-dev-adafruit.deb /tmp/libraspberrypi-doc-adafruit.deb /tmp/libraspberrypi0-adafruit.deb /tmp/raspberrypi-bootloader-adafruit-20140917-1.deb
}

function install_console() {
    chr="$1"
    shift
    
    sudo sed -i 's/rootwait$/rootwait fbcon=map:10 fbcon=font:VGA8x8/g' "${mountpoint}/boot/cmdline.txt"
    sudo sed -i 's/BLANK_TIME=.*/BLANK_TIME=0/g' "${mountpoint}/etc/kbd/config"
}

function ask() {
# http://djm.me/ask
    while true; do
 
 if [ "${2:-}" = "Y" ]; then
     prompt="Y/n"
     default=Y
 elif [ "${2:-}" = "N" ]; then
     prompt="y/N"
     default=N
 else
     prompt="y/n"
     default=
 fi
 
# Ask the question
 read -p "$1 [$prompt] " REPLY
 
# Default?
 if [ -z "$REPLY" ]; then
     REPLY=$default
 fi
 
# Check if the reply is valid
 case "$REPLY" in
     Y*|y*) return 0 ;;
            N*|n*) return 1 ;;
 esac
    done
}

trap cleanup EXIT

echo "START"
is_zipped=0
mountpoint=/

args=$(getopt -uo 'hvri:t:o:b:' -- $*)
[ $? != 0 ] && print_help
set -- $args

for i
do
 case "$i"
 in
  -h)
   print_help
   ;;
  -v)
   print_version
   ;;
  -i)
   imagename="$2"
   echo "Image file: ${imagename}"
   if [ ! -e "${imagename}" ]
   then
    bail "Image \"${imagename}\" doesn't exist"
    
   fi

   # Determine if it's a zipfile, or a valid image file
   if is_zip "${imagename}"
   then
    info ADAFRUIT "File is zipped"
    is_zipped=1
   elif is_image "${imagename}"
   then
    info ADAFRUIT "Image file is not zipped"
    is_zipped=0
   else
    bail "Image file is not valid"
   fi
   shift
   shift
   ;;
  -o)
   pitftname="$2"
   mountpoint="/media/rpi"
   shift
   shift
   ;;
  -r)
   mountpoint="/"
   shift
   ;;
  -t)
          pitfttype="$2"
   echo "Type = ${2}"
   shift
   shift
   ;;
     
 esac
done

if [ "${mountpoint}" != "/" ] && [ -z "${imagename}" ]
then
 print_help
fi

if  [ "${pitfttype}" != "28r" ] && [ "${pitfttype}" != "28c" ] && [ "${pitfttype}" != "35r" ] && [ "${pitfttype}" != "22" ]
then
    echo "Type must be '28r' (2.8\" resistive, PID 1601) or '28c' (2.8\" capacitive, PID 1983)  or '35r' (3.5\" Resistive) or '22' (2.2\" no touch)"
    print_help
fi
# Make sure we have a job to do
if [ "${mountpoint}" != "/" ] && [ -z "${pitftname}" ]
then
 echo "Must specify output image file"
 print_help
fi

info ADAFRUIT "Starting image modification"

needs_clone=1
if [ ${is_zipped} -eq 1 ] && [ "${mountpoint}" != "/" ]
then
 extracted=$((unzip -l -qq "${imagename}" | awk '{print $4}'))
 unzip -qq "${imagename}" || bail "Unable to extract zip"
 if ! is_image "${extracted}"
 then
  rm -f "${extracted}"
  bail "Zip does not contain a valid image"
 fi
 needs_clone=0
 imagename="${extracted}"
fi


wgetfiles

if [ "${mountpoint}" != "/" ]
    then
    if [ ${needs_clone} -eq 1 ]
 then
 info PITFT "Cloning image..."
 info PITFT "---> cp ${imagename} ${pitftname}" 
 cp "${imagename}" "${pitftname}" \
     || bail "Unable to create PiTFT image"
    else
 info PITFT "Renaming image..."
 info PITFT "---> mv ${imagename} ${pitftname}" 
 mv "${imagename}" "${pitftname}" \
     || bail "Unable to rename PiTFT image"
    fi
    
    info PITFT "Mounting image..."
    mount_image "${pitftname}" "${mountpoint}" \
 || bail "Unable to mount PiTFT image"
fi

info PITFT "Updating apt cache..."

apt_update "${mountpoint}" \
    || bail "Unable to update apt cache"

# info PITFT "Slimming down image..."
# apt_cleanup "${mountpoint}" "pkgs.txt" \
#  || bail "Unable to update package list"

info PITFT "Installing Adafruit kernel..."

dpkg_install_kernel "${mountpoint}" \
    || bail "Unable to dpkg debs"

info PITFT "Updating /etc/modules..."
update_etcmodules "${mountpoint}" \
    || bail "Unable to update /etc/modules"

info PITFT "Updating /etc/modprobe.d/adafruit.conf..."
update_adafruitconf "${mountpoint}" \
    || bail "Unable to update /etc/modprobe.d/adafruit.conf"

info PITFT "Updating X11 default calibration..."
update_xorg "${mountpoint}" \
    || bail "Unable to update /etc/X11/xorg.conf.d/99-calibration.conf"

info PITFT "Updating X11 setup tweaks..."
update_x11profile "${mountpoint}" \
    || bail "Unable to update X11 setup"

info PITFT "Updating TSLib default calibration..."
update_pointercal "${mountpoint}" \
    || bail "Unable to update /etc/pointercal"

info PITFT "Updating SysFS rules for Touchscreen..."
update_udev "${mountpoint}" \
    || bail "Unable to update /etc/udev/rules.d"

info PITFT "Installing evtest tslib libts-bin..."
apt_install "${mountpoint}" evtest tslib libts-bin \
    || bail "Unable to install evtest tslib libts-bin"


# ask for console access?
if ask "Would you like the console to appear on the PiTFT display?"
    then
    info PITFT "Updating console to PiTFT..."
    install_console "${mountpoint}" \
 || bail "Unable to configure console"
fi



if [ "${pitfttype}" != "35r" ]
    then
# ask for 'on/off' button
    if ask "Would you like GPIO #23 to act as a on/off button?"
 then
 info PITFT "Adding GPIO #23 on/off to PiTFT..."
     install_onoffbutton "${mountpoint}" \
  || bail "Unable to add on/off button"
    fi
fi

if [ "${mountpoint}" != "/" ]
    then
    info PITFT "Unmounting image..."
    unmount_image "${mountpoint}"
fi

info PITFT "Done"

http://ioriy2k.pe.kr/archives/4762

$ sudo apt-get install tasksel
$ sudo tasksel install lamp-server

$ sudo add-apt-repository ppa:ondrej/redmine
$ sudo apt-get update
$ sudo apt-get install redmine redmine-mysql

$ sudo ln -s /usr/share/redmine/public /var/www/redmine

$ sudo apt-get remove libapache2-mod-passenger

$ sudo gem install passenger

$ sudo apt-get install libcurl4-openssl-dev libssl-dev zlib1g-dev apache2-prefork-dev libapr1-dev libaprutil1-dev
$ sudo passenger-install-apache2-module

* 빌드후 다음과 같은 메세지가 출력되면 메모
   LoadModule passenger_module /var/lib/gems/1.8/gems/passenger-4.0.46/buildout/apache2/mod_passenger.so
   <IfModule mod_passenger.c>
     PassengerRoot /var/lib/gems/1.8/gems/passenger-4.0.46
     PassengerDefaultRuby /usr/bin/ruby1.8
   </IfModule>

$ sudo vi /etc/apache2/mods-available/passenger.load
LoadModule passenger_module /var/lib/gems/1.8/gems/passenger-4.0.46/buildout/apache2/mod_passenger.so

$ sudo vi /etc/apache2/mods-available/passenger.conf
<IfModule mod_passenger.c>
PassengerRoot /var/lib/gems/1.8/gems/passenger-4.0.46
PassengerDefaultRuby /usr/bin/ruby1.8
PassengerDefaultUser www-data
</IfModule>

$ sudo vi /etc/apache2/sites-available/default
<Directory /var/www/redmine>
    RailsBaseURI /redmine
    PassengerResolveSymlinksInDocumentRoot on
</Directory>

$ sudo a2enmod passenger
$ sudo service apache2 restart

$ sudo ufw allow 80

http://ioriy2k.pe.kr/archives/4843

$ sudo apt-get install git-core ruby-git
$ cd /usr/share/redmine
$ sudo ruby script/plugin install --force git://redmin-mylyncon.git.sourceforge.net/gitroot/redmin-mylyncon/redmine-mylyn-connector
$ sudo service apache2 restart

자바 이야기

2015년 1월 14일 수요일

pitftsh

2014년 8월 1일 금요일

Install IBM Worklight Studio

2014년 7월 31일 목요일

mysql tips

2014년 7월 16일 수요일

Install Redmine on Ubuntu 12.04 LTS (with MyLyn and Eclipse plugins)

2014년 7월 3일 목요일

Subversion 특정 날짜동안 변경된 목록 조회

2014년 7월 2일 수요일

[cloudv] Installing Jenkins on Ubuntu

2014년 6월 30일 월요일

[cloudv] Install subversion on ubuntu